The Wytron SATA DVD/CD duplicator controllers support up to 12 targets. These controllers feature an easy-to-use 3 buttons LCD control panel. It also features a language selection menu option which will give you the alternative to change all operating information in Spanish. These duplicator controllers are perfect for heavy production runs since there is no cooling period needed between runs. Let our Wytron duplicator controller serve as your solution for data, music, video backup and much more!

Independent design
The Wytron SATA DVD/CD duplicator controllers support provides up to 12 SATA ports on-board by using 12 fully independent SATA channels, one for master device and the other 11 ports to connect up to 11 sets of CD/DVD/Blu-Ray SATA bus writers for max. burning capability. The master device can be either SATA hard drive or CD/DVD/Blu-Ray Combo reader/writer. Through independent design, each port will then have its max. bandwidth to run at the max. burning speed.
           

High stability and durability
Inherited with Wytron's best tradition, Wytron SATA DVD/CD duplicator controllers are designed and produced to be a product with high reliability and durability.Wytron SATA DVD/CD duplicator controllers can work continuously in duplication with all day long without failure. After day by day of usage, you may find that the writers connected with Wytron SATA DVD/CD duplicator controllers might be replaced for several runs but the Wytron SATA DVD/CD duplicator controllers are still there, work normally and quietly for you. Compared to the short life of those competitors' control cards, the high durability of Wytron SATA DVD/CD duplicator controllers is so impressive and absolutely worthy of being your duplicators controller.

Upgradable firmware
BIOS firrmware can be easily upgraded to suit the latest CD/DVD/Blu-Ray writers released in the market. "One ring to rule all", Wytron's controller card is always fitted with one universal BIOS that suitable for all writers it supports and is not releasing special firmware for specific writer to cause inconvenience for customers, unlike the way of one firmware for one writer in the competitor's controller card.
           

Efficient
Wytron SATA DVD/CD duplicator controllers are equipped with 64MB of DDRII-SDRAM. Through the good programming, the limited memory buffer is used effectively and efficiently, much better than those competitior's controller cards which equipped with much more memory size but without doing anything good, just wasting money and the cost.

Monitoring from PC
Two RS-232 ports built-in, one is for monitoring and the other for automatical disc feeding device (or so-called autoloader). Operation status and information on controller card can be monitored via RS-232 connection between controller card and PC. Through the "Hyper-terminal" within WIndows XP, users can monitor all the operation from PC and yet save the message as logfile for trouble-shooting. Technique support all over the world can be done remotely and easily.
           

High compatibility with writers
Max. connection compatibility for CD/DVD/Blu-Ray writers in the market and there is no special firmware required to connect any specific writer. Blu-ray writers are also supported directly. No special firmware or additional cost is needed

**Use AT power supplies with controllers when building a stand-alone system.